1. Easy to use: Simply connect the new sensor, and the host engine will automatically configure it without entering new programs or calibration factors. The detector settings and algorithms are compressed in the device. The detector is ready to use out of the box.
2. Automatic unit conversion: The results are displayed in a variety of commonly used units. Simply click the key to change the unit selection. Common units and conversion algorithms can be programmed on the detector as required.
3. Anti-interference ability: The signal amplification part has been made in the metal box of the detector. The signal is transmitted to the host through a cable. The cable is protected and has high anti-interference ability to EMI and ESD.
4. Remote use: Via a cable of 1 or 5 meter, it is convenient to measure when the designated place cannot be reached. PMA2100 can connect 2 detectors at the same time.
5. Dose synthesis: Dose synthesis can be done remotely or through the keyboard.
6. Traceability: Each data sample has a series of auxiliary information: date, time, detector type and serial number, the unit currently used, the scale factor set by the user, the date of the detector calibration, and a series of signs that indicate the status of the instrument.
7. Data recording: The host engine can store up to 1024 data. The memory can be started manually or run automatically according to the interval (1 minute-2 hours) set by the user. The unified record structure is suitable for singular data management of all detectors.
8. Computer interface: It can be connected to a computer through a serial interface to transfer the collected data. Download, display and save data using the HyperTerminal in the window.
9. User-defined alarm: The independent alarm function of each detector can monitor the instantaneous value or comprehensive measurement. The alarm settings are stored in the detector.
English
français
Español
русский