SW6 Ultrasonic Thickness Gauge

SW6 Ultrasonic Thickness Gauge

SW6 Ultrasonic Thickness Gauge
  • sw6.jpg
  • sw6-1.jpg
  • sw6-2.jpg
  • sw6-3.jpg
  • sw6-4.jpg
Similar products
  • sw6.jpg
  • sw6-1.jpg
  • sw6-2.jpg
  • sw6-3.jpg
  • sw6-4.jpg


The ultrasonic thickness gauge are featured as cost-efficiency and designed to make accurate measurements on steel, castiron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron. Thickness measurements are made from one side of the material with no need to cut the part.


--Available for gauging various materials such as metal, glass, rubber and etc.
--Whole range transducer models are available for almost all kinds of application, including coarse grain material gauging and high temperature applications(Max.temperature up to 300℃)
-- Automatically recognizing for probes allowing the gauge to match with probes made from various probes manufacturers.
--Power on automatic testing function contributing to measurement accuracy
-- Auto power off detection and customizing power off configuration
-- Probe Zero function, Sound Velocity Calibration function
--9 velocities built in and programmable
--7 practical measurement modes available: Standard Mode, Scanning Mode, Difference Mode,Average Mode, Maximum Limitation Alert Mode, High Temperature Mode(should be matched with high temperature probe)
--8 button keyboard designing for convenient shortcut operations for Probe-zero function, One-point and Two-point calibration, as well as numerical adjusting with direction key control.
--Large data storage capacity, Max. Up to 2000 groups. Every group can reach to 99 data.
--Metric-inch free convertible.

--USB data interface communication, easily accomplishing data transferring with PC and outputting data with “.txt.”


Measuring Range

0. 65mm-400mm(in steel)

Sound Velocity

1000~9999 m/s


0.01mm/0.1mm  selectable


mm/inch (selectable)


2000 groups (100 files / group)


Two point calibration


+/- ( 0.5%Thickness+0.04 ) mm


preset upper and lower limit

Work voltage

3V( 2 AA alkaline batteries)

Work mode

Single point and scan

Interface port

USB 2.0






LCD with backlight

Continuous working period

200hours (with backlight off)

SW6 Standard Configuration:

• Gage One Set
• Probe One Set (5MHz, Φ10mm)
• Guide Manual
• Hermetic Plastic Kit (27cm X 23cm X13cm)
• USB Cable
• Software Disk

Leave us Message

Similar products
  • UM6700 Ultrasonic Thickness Gauge

    UM6700 Ultrasonic Thickness Gauge

    July 30, 2018Ultrasonic Thickness Gauge UM6700Application Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuildi...view
  • Coating Thickness Gauge ED400

    Coating Thickness Gauge ED400

    July 30, 2018Coating Thickness Gauge ED400 ED400 Coating Thickness Gauge is the improved model of the ED300 Gauge. The performance is prominently improved.The gauge is used to measure the thickness of the insulati...view
  • LS210 Digital Glass Thickness Meter

    LS210 Digital Glass Thickness Meter

    July 30, 2018Portable Digital Glass Thickness Meter For Air Space Single Double-Glazing Pane Insulated Glass IG With Resolution 0.2mm LS210LS210 Digital Glass thickness meter is mainly used on measuring glass and ...view