AE300L-H High Shear Lab Mixer

AE300L-H High Shear Lab Mixer

AE300L-H High Shear Lab Mixer
  • ae300l-h.jpg
  • ae300l-h-1.jpg
  • ae300l-h-3.jpg
  • ae300l-h-2.jpg
  • ae300l-h-4.jpg
Similar products
  • ae300l-h.jpg
  • ae300l-h-1.jpg
  • ae300l-h-3.jpg
  • ae300l-h-2.jpg
  • ae300l-h-4.jpg

Lab Shear Mixer Emulsifying Machine High-speeddispersing Emulsifying Digital display Machine


1. Product Overview

AE series of laboratory high shear emulsifying machine is compact micro express series motor, apply to the lab Pilot workshop Low to Medium, or high viscosity liquid mixing mixing, smashing particles in shear emulsifying liquid medium.The apheresis  Cast aluminum molding motor, high quality stainless steel refining such as the shear emulsifying head and controller of work of the group A.Speed Controller with all cruising speed IC speed detection technology, can be immediately effective compensation due to the variation of load and power Source voltage fluctuations caused by speed, with soft start, automatic overload protection, the whole constant reactive power compensation and other characteristics.Of digital display speed and intuitive, to facilitate experimental data acquisition.


2. Technical Parameters

Rated voltage: 230±10 % VAC
Rated frequency: 50/60 Hz
Input power: 510W
Output power: 300W
Rated torque: 0.96 N·m
Work mode: 100 %
Speed control: Yes
Speed range: 2000~13000 rpm
Speed display: digital display×10 rpm
The Material of the Operating head: Stainless steel 304#
Standard configuration: Φ70 mm
Maximum line speed of the rotor: 18 m/s
Mixing capacity(H2O): 200~40000 ml
Size of the mixer(T×B×H): 310×215×700 mm
Weight: 10kg
Permissible ambient temperature: Lower than 40 ℃
Permissible relative humidity: Less than  80%

Leave us Message