AD500S-H  High Shear Lab Mixer

AD500S-H High Shear Lab Mixer

AD500S-H  High Shear Lab Mixer
  • ad500s-h.jpg
  • ad500s-h-1.jpg
  • ad500s-h-2.jpg
  • ad500s-h-3.jpg
Similar products
  • ad500s-h.jpg
  • ad500s-h-1.jpg
  • ad500s-h-2.jpg
  • ad500s-h-3.jpg

Lab Homogenizer Disperser Mixer Digital Display Homogeneous Dispersing Machine


1. Product Overview

AD500S/P high shear emulsifying machine are powered by micro motors of compact-structured Series excitation type, so the products can be widely used in laboratories or testing workshop for the mixing of low, moderate or high viscosity liquids. The mixer consists of the high-speed motor, the working head of homogeneous dispersion, speed controller and other components. The host is made of high quality engineering plastic and die-cast aluminum to ensure steady operation; The Working head is made of stainless steel for wide experimental application; The Operating Speed is controlled by a microprocessor to compensate for any sudden rotating speed change caused by overload changes or voltage fluctuations. The constant rate and built-in soft-startup can ensure the operating safety. Stepless regulation of the speed can  make sure you can modify the speed accordingly. Among our products, The digital speed display on the H-type can be of great help for you to collect experimental data; and the timer function can ensure the control of the operating time in experiment.


2. Technical Parameters

Model:


AD500S-H

Rated voltage:

ACV

220 ±10%

Rated frequency:

Hz

50 / 60

Input power:

W

850

Output power:

W

500

Rated torque:

N·cm

17.1

Work mode:


S1(Continuous)

Speed control:

Level

Stepless

Speed range:

rpm

2000~28000

Speed display:


Yes

Speed detection function:


Yes

Timer function:


Yes

Speed memory function:


Yes

Overload protection:


Yes

Working head material:

#

Stainless steel  316 #

Adaptation for working head:

G

12 / 18 / 24 / 30 / 36

Permissible ambient temperature:

Lower than 40

Permissible relative humidity:

Less than  80

Size of the mixer(T×B×H):

mm

215×310×720

Weight:

kg

8.7


3 .Dispersion Emulsification Head Parameters

Work head specificatons

12G

18G

24G

30G

36G

Mixing capacity (H2O)(ml)

30-800

50-1500

80-5000

100-8000

150-13000

Max viscosity tolerated(mpa.s)

1000

2000

5000

6000

7000

Peak linear speed of the otor(m/s)

12

15

18

22

26

Minimum/maximum height of the liquid immersed(mm)

35/150

45/160

50/165

60/170

65/175

Stater diameterf(mm)

12

18

24

30

36

Work head length(mm)

2125

222

225

235

238

Max temperature tolerated (℃)

120

120

120

120

120

Work head material(#)

SS316

SS316

SS316

SS316

SS316

Bearing material(#)

PTFE

PTFE

PTFE

PTFE

PTFE


Various size of Stirring Shaft / rod is optional Can be purchased separately.
Various size of Stirring Shaft / rod is optional
12G/18G/24G/30G/36G

Leave us Message